• Monday - Friday / 8AM -5PM
  • 770-745-8728 / Fax – 770-745-8839
  • FrankA@abramsfab.com
    Abrams Precision Fabricators
    Contact Us
    • Home
    • Fabrication Services
      • 5 Axis CNC Waterjet Cutting
      • CNC Laser Cutting
      • CNC Routing
      • Precision Metal Forming
      • Shearing & Sawing
      • Welding
    • About Us
    • Completed Projects

    Archives

    • Home
    • Archives: Service
    • April 12, 2020
    • 0 Comments

    5 Axis CNC Waterjet Cutting

    Abrasive waterjet cutting uses a mixture of high pressure water and abrasive (garnet) in order to cut simple or complex parts made from virtually any material known to man. The only material we cannot cut is Carbide, due to its hardness, and tempered glass that will shatter. Abrams Precision Fabricators has invested in one of the largest machines in the south. Our standard table can fit material up to 6.5’ x 24’ and can cut material as thick as 4”. With special fixturing, we can cut up to 8” thick!

    Our Dynamic XD cutting head provides accurate 5-axis motion, capable of cutting compound angles with high accuracy. Our dynamic head allows us to cut 3x faster with less taper than conventional waterjet machines.

    In addition to our waterjet cutting services, Abrams is equipped to perform a variety of secondary services such as bending, folding and welding, eliminating your need for outsourcing to multiple vendors. Our one-stop-shop will provide you with reduced costs, shortened lead times and peace of mind.

    (Flow Mach 3 2320B w/Hyplex Pump Dynamic XD)

    Waterjet Capacity:
    6.5’ x 24’ Work Envelope
    Mild Steel – 4 “
    Stainless Steel – 4”
    Aluminum – 4”
    Beveling Capabilites

    Read More
    • April 12, 2020
    • 0 Comments

    Shearing & Sawing

    Our metal shearing and sawing department includes the following services: shearing, cut to length, blanking, saw cutting and miter cutting. Metal shearing is an accurate and cost effective way to cut sheet metal and plate to size from a larger stock of material. They are used for preparing blanks for stamping and CNC presses. Our shear is rated from Gauge to ¼ Steel and lengths up to 14’. Our shear features a blade gap adjustment which allows us to minimize the burr by precisely adjusting the correct distance between the upper and lower knife blades.

    Our large capacity vertical band saw has the ability to not only cut 90° degree cuts, but can miter from 45° left to 45° right .

    Shearing Capacity:
    Gauge – ¼” Steel @ 14’ Long

    Sawing Capacity:
    18” x 20” (wxh) @ 90°
    18” x 13” (wxh) @ 45°

    Read More
    • April 12, 2020
    • 0 Comments

    Precision Metal Forming

    Our forming department is equipped with 2 CNC Hydraulic Press Brakes and a CNC Folding Machine for your bending and folding needs. Metal folding is an exceptional process if you need to fabricate large panels, deep boxes or enclosures.

    If you need sheet metal or light plates rolled, we are equipped to handle material up to 16’ long. This is a great machine for producing decorative column covers or other rolled architectural details. Our section rollers can bend your structural tubes, angles and channel.

    CNC Press Brake
    (Accurpress 717514)
    Up to 175 Tons x 14’

    CNC Metal Folding
    (Schroder Powerbend Industrial 4040/5.0)
    Up to 3/16” x 13’ Mild Steel

    CNC Tube Bending

    CNC Rolling
    (Faccin Plate Roll Model 5028 Type: 4HEL)
    Gauge to Light Plate Rolling up to 16’

    Read More
    • April 12, 2020
    • 0 Comments

    CNC Laser Cutting

    Abrams Precision Fabricators handles an array of precision laser cut projects. From a simple flange, a complex electrical chassis, to decorative architectural panels and signs. Our state-of-the-art flying optic fiber laser cutting system can cut a variety of metals including stainless steel, aluminum, carbon steel and brass. We are equipped to handle high volume OEM parts to short run prototypes. Fast processing speeds, automatic pallet exchanger and tight tolerances means that you will save time and money.

    In addition to our laser processing services, Abrams is equipped to perform a variety of secondary services such as bending, folding and welding, eliminating your need for outsourcing to multiple vendors. Our one-stop-shop will provide you with reduced costs, shortened lead times and peace of mind.

    (Mazak Optiplex 4020 Fiber II 6 KW)
    Capacity:
    6’ x 12’ Work Envelope
    Mild Steel – 1 “
    Stainless Steel – 1”
    Aluminum – ¾”

    Read More
    • April 12, 2020
    • 0 Comments

    CNC Routing

    We offer CNC routing services for processing materials such as Acrylic, Wood, ACM, PVC, Foam and MDF. Our machines are equipped with large work areas in order to handle your larger than normal materials.
    Whether you need 3D Carving, Acrylic Fabrication, Architectural Millwork, Exhibits and Fixtures or Sign Making, our machines are precise and efficient and capable of handling your next project.

    Router Capacity:
    (Multicam MG Series & Smart ER Series II)
    62” x 217” Work Envelope

    Read More
    • April 12, 2020
    • 0 Comments

    Welding

    Our 5 welding stations allow us to MIG (metal inert gas), TIG (tungsten inert gas) and Stick (shielded metal arc welding) weld materials such as steel, stainless steel and brass. Being in the architectural business for 20 years, our operators are skilled at grinding and smoothing out materials after welding to get the product ready for paint or powder coating.

    Read More

    Recent Posts

    Meta

    • Log in
    • Entries feed
    • Comments feed
    • WordPress.org

    Categories

    • No categories
    Abrams Precision Fabricators A full service state-of-the-art fabrication facility located in Austell, Georgia.

    Quick Links

    • Home
    • About Abrams Fab
    • Contact Abrams Fab
    • Completed Projects

    Services

    • 5 Axis CNC Waterjet Cutting
    • CNC Laser Cutting
    • CNC Routing
    • Precision Metal Forming
    • Shearing & Sawing
    • Welding

    Contact Us

    770-745-8728
    FrankA@abramsfab.com
    7260 Delta Circle, Austell GA 30168

    Copyright © 2020 Abrams Precision Fabricators - Website Designed By: JW Design Pro

    • Contact Us